Make better circuits

HOME         ABOUT US        ENTRY         BACKUP        SERVICES    CONTACT US

Founded in 1969, LCOA "Laminating Company of America" brings over 40 years of expertise in Pressing, Laminating and Fabricating of Films, Foils and Composite Materials to your operation.

LAMINATION SERVICES

 

Hot Roll Laminating

    In-line multi-layer lamination with custom adhesive delivery system

 

Hot Roll Press

    Chrome-plated hot rolls

    Top and bottom rolls apply to substrate simultaneously

 

  LAMINATION SERVICES

FLAT PANEL PRESSING SERVICES

 

Production Presses up to 4 foot x 10 foot panels

     Maximum 200 psi on a 4’ x 10’ (1.22m x 3.05m) sheet

     Maximum 250 psi on a 4’ x 8’ (1.22m x 2.44m) sheet

     Maximum 400 psi on a 4’ x 5’ (1.22m x 1.52m) sheet

 

High Volume, Large Format capability

     10 opening press with 3” (76mm) opening per book

     MAX temperature 335°F (168°C)

     Chiller tower to control cool down

     Real time recording of temperature and pressure

     Steam-powered, very efficient and environmentally friendly

 

Electric Press up to 24” x 30” (609mm x 762mm)

     Maximum pressure 750 psi over full width

     4 opening press with 6” (152mm) opening per book

     MAX temperature 450°F (232°C)

     Real time recording of temperature and pressure

     Electric heaters, allowing higher temperature

 

PRESSING SERVICES

WATER JET SERVICES

WATER JET SERVICES

Waterjet is the ultimate machine tool, no matter the application. Why?

On top of ultimate versatility there are three main benefits to waterjet cutting:

 

Cold Cutting Process

This means no heat or stress is imparted into your cut materials.

 

Satin Smooth Edge

This means you can take the part directly off of the cutting table, no secondary finishing required.

 

Minimal Kerf

Minimal kerf and high accuracy combined with the ability to cut virtually any material means more opportunities. Waterjet cutting @ 80,000 PSI

 

MAX 9’ x12’ (2.75m x 3.65m)

 

Pure Waterjet

Hair-thin pure waterjet stream ideal for cutting soft materials.

 

Standard Waterjet

Uses garnet abrasive to cut virtually any hard material

 

CORE MATERIALS

Core Materials

 

Honeycomb

Stiff and extremely lightweight.

 

Balsa

Structural core with high shear strength

 

Foam

Very little weight with a great deal of volume and structure.

 

Various wood products:

OSB or plywood (used in wall panels).

 

Decorative laminates:

Fiber reinforced composite structure, or composite sandwich panel skin sheet.

 

Metal Clad Laminates

EMI Shielding

 

LCOA • 20322 WINDROW DRIVE, LAKE FOREST CA 92630 • 949.587.3300